Brand New Swimm Platform for Epic 22

[Miller1]

I have a brand new teak platform for sale at $325.00  Anyone need one?  Make me an offer!

[brad]

What are the dimensions?  Will it fit on a 2002 SX?

[Miller1]

Brad,  Sorry I don't have the dimensions right now.  I can tell you it is an original equipment platform for a 1999 Epic22. 

[lesman01]

Miller1, first you are looking for a swim platform,

http://www.epicmarine.com/forum4/index.php?topic=1719.msg14540#msg14540

now you are trying to get rid of one? Did you get one plus an extra one? Just curious.

[skibeau]

Our '99 Epic 22 teak swim platform is 62.5" wide at the transom and projects 20" aft from the center of the transom.  I don't know if the teak and white platforms are interchangeable, but I hope these dimensions help...

[brad]

Thanks for the dimensions - they appear to be the same as the composite swim deck.

Is the teak deck solid on the bottom like it appears on the top or are there braces (doubles layers on the edges but only a single layer in other spots)?  The reason for my question is the possibility of trimming the teak deck to 52" wide and cutting off the corners for my Wake Surf swim deck project.

Thanks for the help and clarification.

Brad

[Miller1]

I ordered a new one from a dealer and it was shipped to me damaged.  I was able to salvage it, but they sent me a new one anyway.  So I have the "Good" one to sell.

[skibeau]

The teak swim platform second layer is about 2/3 of the top.  There's a small third layer between the brackets and the second layer.  Looks like the platform can be trimmed around six inches on each side, a few inches off the corners and maybe nine inches off the projection.  Check out the pics of the swim platform bottom...

[brad]

Awesome! 

Thanks for taking the pic's. 

This is very helpful as I analyze the options.

[skibeau]

Great, you're welcome!

[masonlk]

Brad, look at the pictures of the swim platform on the SX for sale on Inboards only out of Littleton, Co. Might be worth a shot to PM him and get some info on his modified swim platform.

[brad]

Thanks for the reference.

I've followed the comments of the owner (Wakehead) of this SX from Colorado on this forum.  If I'm not mistaken, he purchased a Correct Craft swim platform that is 38 inches wide.  It appears he mounted an additional set of male bracket receptacles to accommodate the narrower width of the platform.  I'm trying to use the existing bracket setup but may resort to adding a set if trimming the platform isn't enough.

[Miller1]

Brad,  I have a new set of female brackets that I can throw in if they will help you.

[athlon12]

Hi

Do you still have the platform for sale?