« Reply #2 on: August 13, 2007, 03:08:42 am »
This is where I got mine. Granted...they are not EPIC but I got the black/white skull ones and they look sweet. Here is the thing, our guides are pvc pipe that slides over a metal post. I took off the pvc, turned it upside down, used dish soap and a touch of water, and was able to work it down (w/ some elbow grease). Then flip over and slide back onto metal post. Also, the ones I got were the wrong length because I have no patience and forgot to measure the length of the post, so the pad was slightly longer than the pvc...thus when I put the pad/pvc back onto the post, it stood a little taller (I like this, but the base of the pvc is not touching the metal plate at the bottom of the post by a few inches or so). You don't notice thought since the pad covers all of it. No problems at all this year and they look killer.
http://www.screaminsacs.com/boatguidepads.phpGood luck!
Logged
01' X-22 w/ P.Pass, Acme 3 blade, Y. Optima, 10" Kicker L7 Solobaric, 600w diamond audio, 4 Polk Audio 6.5" tower speakers
02' Supercharged 4-Runner Sport, 7th inj., TRD Trans. cooler, Nav., 3" lift, Eibach, Air Shocks, 285 Toyo MT's, XM, R. Optima, TRD package.
