I did 8awg power wire to the dash upgrade, the dual battery with relay upgrade, and added a couple of amps/speakers. Now my switches at the dash and ballast don't seem to work well in accessories or off position.
The ballast switches slowly blink when the key is in acc or off. The dash switches won't work 75% of the time in acc. When I do push them it turns on for 3 seconds and then goes back off and all the switch lights flash, etc.
I wired the 8awg power wire from starting battery to a terminal strip and then from there 10awg went to DECC terminal strip. As a test I unhooked this new 8awg power wire and the switches were still messed up.
My dual battery relay setup is only connected when the key is turned on.
-Negative terminals connected.
-Positive terminals connected at unswitched side of battery kill, then goes thru relay
Everything to run the boat is connected to the starting battery.
-Old 12awg and new 8awg connected to negative terminal
-Old fused 12awg and new fused 8awg connected to switched side of kill switch
-Also my head unit is connected to starting battery somehow thru the original OEM wires (the original 12awg).
Only amps are run off second battery.
Any idea as to why the switches are not functioning well? Does the blinking mean anything?
Sorry for the long post but I just wanted to give as much detail as possible.
Thanks
Sean