Epic Forum

Epic Boards => Announcements => Topic started by: Capt Rick on May 22, 2019, 12:45:45 pm

Title: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on May 22, 2019, 12:45:45 pm

Have done 3 kits this week for 99 model year boat when gauges stop working.

MGA0010911   MDC replacement, 1999 Instrument 7 Gauge Dash, replace w Analog Rick Cohn 10200 Newington drive Orlando, Fl 32836   10    2    $749.00    35.

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on May 22, 2019, 13:06:12 pm

Steps to removing MDC, gauges and wiring.

Battery switch off.
Remove 2 screw cap next to windshield, using short stub Phillips screwdriver remove 2 screws.
Remove 2 screws caps on bottom front and nuts w 3/8 wrench.
Remove stereo cover and back securing strap  slide stereo forward.

Tilt dash up a get a small box to hold up dash.
Remove the nuts with deep socket 5/16
Remove wire clip holding wires to each gauges. Push gauges out from back with twisting motion.
Remove 4 screws holding the Medallion MDC from under dash ( removing the fire extinguisher) and the kick board there are 4 Phillips screws holding it. Remove the speedometer Hoses cut at fitting.
Remove alarm wire at top. Remove the 6 pin plug and the 12 pin plug attached to MDC end of wiring harness.
ship to Rick Cohn 10200 Newington Drive Orlando Fl 32836
allow 1 week to process. questions 407-701-4430

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on May 22, 2019, 13:18:34 pm

Correction remove 6 + 9 Pins white connector Plus Connected to MDC.

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on May 23, 2019, 21:25:53 pm

Installing new gauges

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on July 31, 2019, 03:35:14 am

The computer MDC is no longer available. This kit replaces all gauges with Analogue gauges with 2 year warranty.
 Capt. Rick
407-701-4430 

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on October 18, 2020, 09:28:08 am

Remember on 7 gauges dash panels there is a way to have a reliable gauges now.

MGA0010911   MDC replacement, 1999 Instrument 7 Gauge Dash, replace w Analog Rick Cohn 10200 Newington drive Orlando, Fl 32836   10    2    749.00    35. shipping

email me at boatetrade@aol.com

I iwll send instructions for DIY.

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on October 30, 2020, 13:45:02 pm

Pictures of new gauges without MDC.

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on October 30, 2020, 13:47:24 pm

Parts to send Capt Rick

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on July 11, 2021, 18:52:07 pm

MGA0010911   MDC replacement, 1999 Instrument 7 Gauge Dash, replace w Analog Rick Cohn 10200 Newington drive Orlando, Fl 32836   10    2    $749.00    35.
This includes alarms for low oil pressure and 2 heat sensors for hot exhaust risers.

EMAIL Boatetrade@aol.com

Capt Rick

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on July 17, 2021, 23:12:47 pm

7/2021 I now have gauges set  to do 4 kits. 

email me for directions
boatetrade@aol.com

Title: Re: MDC Gauges replacement for 99 Model year
Post by: Capt Rick on August 03, 2021, 11:53:59 am

FREE Spport when installing new gauges and alarm for 7 gauge replacements .

Capt Rick